Home » Posts filed under Flytouch 2
You know the Fly Touch Tablet PC Flytouch 2 Flytouch 3 is best Tablet PC hot sales series , more port USB and TF card port have HDMI out put have GPS and fast wifi 11b/g and support 3G and Camera: 1.3 M pixtel also the tablet pc process have fast 1GHZ more Ram DDR 2 512MB etc..
Processor: Infortm X220 ARM11 1Ghz
Rom (Flash Disk )4GB and 8GB
Power On/off, Front-side Back Button,Home and Menu buttons on the side
2x USB2.0(OTG), 1 x TF card slot, 1 x DC jack 1×HDMI
|
Fly Touch 2 have 2 USB Port and 2 TF card slot
Processor: Infortm X220 ARM11 1Ghz Rom (Flash Disk )only have 4GB Power On/off, Front-side Back Button,Home and Menu buttons on the side 2x USB2.0(OTG), 2 x TF card slot, 1 x DC jack 1×HDMI |
Next day, when I turn on my flytouch II, It can't boot up, the started it up
to the Green screen then stop to loading. Try many ways, power on/off or
released all the battery life to restart again, But all fault, my tablet pc
now is bricked "green color Brick". I don't know what happen on it. It's made
me so sad. Can anyone help to solve the problem, Please !-------------------------I have try to find solutions on internet and with this procedure:
hit the reset button ( on the side of the tablet ) then hold the Home and
power button at the same time until the screen with a triangle and an X
appear. but never appear with a lot of button's usage (time to push,change home by menu etc)
may be a sd card is necessary with what software on it ?try to 1-reset 2- hold home( button near wifi on/off switch) and power on and hold these two button 30 sec and nothing happen.
but I have try this 1-reset 2 hold large black button with white square in it in front and power on it appear on the screen on white on black:
1- a serial of number more 8 serial of 8 number
2- a text System will boot in 5s ... (decreasing 4s,3s,2s,1s and start to the green screen)
The link that davidmonas posted is the right one but it has a lot of things.
What you have to do is:
1) Get a cable to connect the tablet to the pc.
2) go here and get the last firmware --------- dl.dbank.com/c0px0ishux or www .mediafire.com/?630oge6d4a32gzr
3) Get the burntool here ----------- megaupload.com/?d=QCPV7V9D
4) Extract both of them
4) Turn off you tablet.
5) Connect the table to the pc with the cable
6) Hold the Menu button + Power button for 5 seconds
7) In windows it will pop up a message saying that a new device has been detected and the it will say that it was impossible to find drivers to connect the device.
Go to your Control panel --> Device manager. Change to classic view to find the Device manager
It will show some unreconized hardware with a yellow mark. Rigth click on that-----> update Driver
The in the new window that popups you choose Install from a list or a specific location ----> Dont search i will choose the driver to install --> Have a disk ---> then browse to the place where you extracted the burntool ---> choose the file named "secbulk.inf" and confirm. Then just do next-next-next till the end
8 ) go to the place where you extracted the burn tool and open the file name burntool_v07.5
9) in the burntool you should see the device10 bar at green if the device is correctly connected to the pc
