- Rockchip 2818 Dual Core(ARM+DSP) 600MHz
- RAM: 256MB DDR2
- Double touch
- Storage: 2GB MLC Nand Flash
- Built-in USB HOST channel dedicated to support TD, WCDMA, EVDO etc. 3G module
Android Tablet PC Capacitive touch screen
Check the Android Tablet PC Capacitive touch screen
Flytouch 2 reset and system issue
Next day, when I turn on my flytouch II, It can't boot up, the started it up
to the Green screen then stop to loading. Try many ways, power on/off or
released all the battery life to restart again, But all fault, my tablet pc
now is bricked "green color Brick". I don't know what happen on it. It's made
me so sad. Can anyone help to solve the problem, Please !
-------------------------
I have try to find solutions on internet and with this procedure:
hit the reset button ( on the side of the tablet ) then hold the Home and
power button at the same time until the screen with a triangle and an X
appear. but never appear with a lot of button's usage (time to push,change home by menu etc)
may be a sd card is necessary with what software on it ?
try to 1-reset 2- hold home( button near wifi on/off switch) and power on and hold these two button 30 sec and nothing happen.
but I have try this 1-reset 2 hold large black button with white square in it in front and power on it appear on the screen on white on black:
1- a serial of number more 8 serial of 8 number
2- a text System will boot in 5s ... (decreasing 4s,3s,2s,1s and start to the green screen)
to the Green screen then stop to loading. Try many ways, power on/off or
released all the battery life to restart again, But all fault, my tablet pc
now is bricked "green color Brick". I don't know what happen on it. It's made
me so sad. Can anyone help to solve the problem, Please !
-------------------------
I have try to find solutions on internet and with this procedure:
hit the reset button ( on the side of the tablet ) then hold the Home and
power button at the same time until the screen with a triangle and an X
appear. but never appear with a lot of button's usage (time to push,change home by menu etc)
may be a sd card is necessary with what software on it ?
try to 1-reset 2- hold home( button near wifi on/off switch) and power on and hold these two button 30 sec and nothing happen.
but I have try this 1-reset 2 hold large black button with white square in it in front and power on it appear on the screen on white on black:
1- a serial of number more 8 serial of 8 number
2- a text System will boot in 5s ... (decreasing 4s,3s,2s,1s and start to the green screen)
Flytouch 2 Android Tablet PC etc Update ROM
The link that davidmonas posted is the right one but it has a lot of things.
What you have to do is:
1) Get a cable to connect the tablet to the pc.
2) go here and get the last firmware --------- dl.dbank.com/c0px0ishux or www .mediafire.com/?630oge6d4a32gzr
3) Get the burntool here ----------- megaupload.com/?d=QCPV7V9D
4) Extract both of them
4) Turn off you tablet.
5) Connect the table to the pc with the cable
6) Hold the Menu button + Power button for 5 seconds
7) In windows it will pop up a message saying that a new device has been detected and the it will say that it was impossible to find drivers to connect the device.
Go to your Control panel --> Device manager. Change to classic view to find the Device manager
It will show some unreconized hardware with a yellow mark. Rigth click on that-----> update Driver
The in the new window that popups you choose Install from a list or a specific location ----> Dont search i will choose the driver to install --> Have a disk ---> then browse to the place where you extracted the burntool ---> choose the file named "secbulk.inf" and confirm. Then just do next-next-next till the end
8 ) go to the place where you extracted the burn tool and open the file name burntool_v07.5
9) in the burntool you should see the device10 bar at green if the device is correctly connected to the pc
What you have to do is:
1) Get a cable to connect the tablet to the pc.
2) go here and get the last firmware --------- dl.dbank.com/c0px0ishux or www .mediafire.com/?630oge6d4a32gzr
3) Get the burntool here ----------- megaupload.com/?d=QCPV7V9D
4) Extract both of them
4) Turn off you tablet.
5) Connect the table to the pc with the cable
6) Hold the Menu button + Power button for 5 seconds
7) In windows it will pop up a message saying that a new device has been detected and the it will say that it was impossible to find drivers to connect the device.
Go to your Control panel --> Device manager. Change to classic view to find the Device manager
It will show some unreconized hardware with a yellow mark. Rigth click on that-----> update Driver
The in the new window that popups you choose Install from a list or a specific location ----> Dont search i will choose the driver to install --> Have a disk ---> then browse to the place where you extracted the burntool ---> choose the file named "secbulk.inf" and confirm. Then just do next-next-next till the end
8 ) go to the place where you extracted the burn tool and open the file name burntool_v07.5
9) in the burntool you should see the device10 bar at green if the device is correctly connected to the pc
